Junsi iCharger 308 Duo Charger 2x650W - 1300W

Specifications:

• Microprocessor Controlled
• Supported Battery Types: LiIo / LiPo / LiFe / NiZn, NiMH / NiCd, Pb
• Number of cells: 1-8 LiIo / LiPo / LiFe / NiZn, 1-20 NiMH / NiCd, 1-15 Pb (2-30 V)
• Input voltage: DC 10-30 V
• Input current: <60A, but both channels are limited to 40A each
• Charging power max (asynchronous): 1300W - 2 x 650W from> 23.5V (each output can not exceed 800W)
• Charging power max. (synchronous): 1300W from> 23.5V
• Charging power at input voltage> 23.5V: Max. 1300W
• Charging power at input voltage 12V: Max. 432W with only one output, 648W with
• use of both outputs
• Charging current: 2 x 0.05 - 30A (asynchronous)
• Charging current: 0.05 - 50A (synchronous)
• Discharge power max .: 130W synchronous, 2 x 65W asynchronous (one output alone can reach a maximum of 80W).
• Discharge current: -2 x 0.05 - 30A (asynchronous), 0.05 - 50A (synchronous)
• Regenerative discharge: up to 1300W async hron, 1300W synchronous (each output can be max. 800W)
• Unloading with external load max .: 2100W 35V / 30A (each output can be max 1050W)
• Balancer current: 1.2A per output and cell or 2.4A in sync Mode
• Plug-in system balancer: XH
• Balance Accuracy: <10mV
• automatic fan control - 2 fans
• USB Port: 5V / 1A (current limit at 1.2A)
• Micro SD slot for storing logs and data
• Dimensions: 171.2 × 117.8 × 58.8 ± 0.5mm
• Weight: 0.91 kg
• Internal resistance measurement of the cells
• Servotest
• Firmware update via USB port possible.

Delivery:

• 2x Balancing board XH
• 2x balancing cable 9 wire for Balancerboard XH
• 2x 2.5 mm² charging cable with banana plug
• 1x input cable 4 mm² to 5.5 mm connector
• Installation CD with software and instructions in english
• Printed german user manual